Euroglas All Glassfibre Extension Ladder (Push Up) to EN131

View larger

Clow Euroglas All Glassfibre Push Up Extension Ladder to EN131

Reference:

Condition: New product

Clow Euroglas® Ladders are the ultimate in GRP ladders – with an all glassfibre construction, (stiles and rungs), these ladders offer the best there is in glassfibre ladder construction. Compliant with European Standard EN131 these ladder safely support a maximum load of 150kg.

Availability: Manufactured to order, (estimated lead time 7 - 10 days).

More details

Write a review

Data sheet

Max Weight	150kg
Filter	Class EN131 - Commercial 150kg
Max Extension Height	From EG14 - 4.20m (14') to TEG40 - 12.20m (40')
Ladder Material	Fibreglass

More info

Clow Euroglas All Glassfibre Extension Ladder (Push Up) to EN131

Product Range

Dual Section
Code	Closed Height	Extended Height	Rungs	Weight
EG14	2.44m (8')	4.20m (14')	8	17.7kg
EG18	3.05m (10')	5.49m (18')	10	22.1kg
EG22	3.66m (12')	6.70m (22')	12	25.9kg
EG26	4.28m (14')	7.92m (26')	14	29.6kg
EG29	4.88m (16')	8.84m (29')	17	33.4kg
EG33	5.39m (18')	10.06m (33')	19	37.1kg
EG36	6.10m (20')	10.97m (36')	21	40.9kg

Triple Section
Code	Closed Height	Extended height	Rungs	Weight
TEG20	2.44m (8')	6.00m (20')	8	26.5kg
TEG27	3.05m (10')	7.30m (24')	10	33.1kg
TEG32	3.66m (12')	9.10m (30')	12	38.8kg
TEG36	4.28m (14')	11.0m (36')	14	44.4kg
TEG40	4.88m (16')	12.20m (40')	17	56.0kg

Product Description

Euroglas® Ladders are manufactured in the UK at the Clow Glassfibre Ladder Plant in Glasgow. Constructed with glass-reinforced plastic, (GRP), and non-slip resin matrix glass reinforced rungs these all glassfibre ladders offer the best there is in glassfibre ladder construction.

The all glassfibre Euroglas® ladder is constructed from box section stiles manufactured from glass reinforced plastic. The rungs are manufactured from serrated non-slip, resin matrix glass reinforced tubes. The rungs themselves are secured and fully bonded into specially designed box section stiles.

Years of research and development have gone into the design and manufacture of Clow Euroglas® Ladders and this has resulted in a unique rectangular box section ladder stile capable of providing enormous strength together with lightness, safety and durability.

The all glassfibre construction of these ladders provides a product which is completely electrically insulated and ideal for use within high voltage environments. The inert properties of glassfibre also make this ladder ideal for use within environments where there is any risk of exposure to chemical agents. Euroglas® Ladders have been tested to the relevant electrical requirements of American ANSI 14.5 and exceed the following electrical tests of ANSI 14.5: AC Dielectric Strength:- the minimum Dieletric Strength allowed is 25,000 volts and Euroglas Ladders surpass this with a minimum Dieletrical Strength of 35,000 volts; DC Current Leakage:- the maximum D.C. Current Leakage when tested at 90,000 volts should be no greater than 90 micro amperes – Euroglas® Ladders have been shown to have a DC current leakage of only 60 micro amperes.

With exceptional electrical resistance and a structure with a high degree of weather and chemical resistance Clow Euroglas® Ladders offer high quality cost effective solutions within the range of specialist GRP ladders.

These ladders are available as extension type ladders in single, dual and triple section lengths and conform to European Standard EN131, safely supporting a maximum load of 150kg.