Clow Euroglas® Ladders are the ultimate in GRP ladders – with an all glassfibre construction, (stiles and rungs), the Clow Euroglas® Ladder range offers the best there is in glassfibre ladder construction. Conforming with European Standard EN131 these ladders safely support a maximum load of 150kg.
Availability: Manufactured to order, (estimated lead time 7 - 10 days).
This product is no longer in stock
|Filter||Class EN131 - Commercial 150kg|
|Max Extension Height||From EG14R - 4.20m (14') to TEG40R - 12.20m (40')|
|Code||Closed Height||Extended Height||Rungs||Weight|
|EG14R||2.44m (8')||4.20m (14')||8||19.7kg|
|EG18R||3.05m (10')||5.49m (18')||10||24.3kg|
|EG22R||3.66m (12')||6.70m (22')||12||28.6kg|
|EG26R||4.28m (14')||7.92m (26')||14||32.6kg|
|EG29R||4.88m (16')||8.84m (29')||17||36.8kg|
|EG33R||5.39m (18')||10.06m (33')||19||40.9kg|
|EG36R||6.10m (20')||10.97m (36')||21||45.0kg|
|Code||Closed Height||Extended height||Rungs||Weight|
|TEG20R||2.44m (8')||6.00m (20')||8||31.1kg|
|TEG27R||3.05m (10')||7.30m (24')||10||37.4kg|
|TEG32R||3.66m (12')||9.10m (30')||12||43.9kg|
|TEG36R||4.28m (14')||11.0m (36')||14||50.2kg|
|TEG40R||4.88m (16')||12.20m (40')||17||62.5kg|
Clow Euroglas® Ladders are the ultimate in GRP ladder construction. Manufactured in the UK from glass-reinforced plastic, (GRP), and non-slip resin matrix glass reinforced rungs these ladders offer the best there is in glassfibre ladder construction.
With box section stiles manufactured from of glass reinforced plastic and rungs are manufactured from serrated non-slip, resin matrix glass reinforced tubes the Euroglas® Ladder offers an all glassfibre product. The all glassfibre construction of these ladders provides a product which is completely electrically insulated and ideal for use within high voltage environments. The inert properties of glassfibre also make this ladder ideal for use within environemnts where there is ny risk of exposure to chemical agents.
Euroglas Ladders have been tested to the relevant electrical requirements of American ANSI 14.5 and exceed the following electrical tests of ANSI 14.5: AC Dielectric Strength:- the minimum Dieletric Strength allowed is 25,000 volts and Euroglas Ladders surpass this with a minimum Dieletrical Strength of 35,000 volts; DC Current Leakage:- the maximum D.C. Current Leakage when tested at 90,000 volts should be no greater than 90 micro amperes – Euroglas Ladders have been shown to have a DC current leakage of only 60 micro amperes.
Years of research and development have gone into the design and manufacture of the Euroglas® Ladder and this has resulted in a unique rectangular box section ladder stile capable of providing enormous strength together with lightness, safety and durability.
Clow Euroglas® Ladders are available in single, dual and triple section lengths.